Cocoapods 설정이 터미널의 포드 설정 명령에서 멈춤

Cocoapods 설정이 터미널의 포드 설정 명령에서 멈춤

---

MacBook-Pro:~ skbc$ pod setup --verbose
/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/universal-darwin13/rbconfig.rb:212: warning: Insecure world writable dir /usr/local/bin in PATH, mode 040777

Setting up CocoaPods master repo

Cloning spec repo `master` from `https://github.com/CocoaPods/Specs.git` (branch `master`)
  $ /usr/bin/git clone 'https://github.com/CocoaPods/Specs.git' master
  Cloning into 'master'...

Cocoapods 웹 사이트, SO 및 몇 가지 비디오 자습서에서 제공하는 리소스를 살펴 보았습니다. 몇 시간을 기다린 후에도 아무 일도 일어나지 않지만 여전히 문제가 무엇인지 파악하려고 노력하고 있습니까? 귀하의 의견과 제안에 감사드립니다. 감사합니다!!!

---

붙어 있지 않습니다. 시스템의 "활동 모니터"에 가서 "네트워크 탭"을 확인할 때까지 같은 생각을했습니다.

그러면 무언가가 다운로드되고 있음을 알 수 있습니다. 호출 된 프로세스가이를 git-remote-http담당합니다.

기다려! 나에게도 똑같은 일이 일어났습니다. :)

행운을 빕니다!

---

이것은 http://blog.cocoapods.org/Repairing-Our-Broken-Specs-Repository/ 문제 때문일 수 있습니다 ... 저장소를 제거하고 다시 설정해야합니다 ...

pod repo remove master
pod setup

나를 위해 일했다

아래 질문에도 대답했습니다 . 팟 설치 오류

---

진행을 얻으려면 마스터를 직접 복제 할 수 있습니다.

pod repo remove master
git clone https://github.com/CocoaPods/Specs.git ~/.cocoapods/repos/master
pod setup

---

상황을 제거하고 --verbose각 명령 앞에 무슨 일이 일어나고 있는지 확인 하기 위해 단계를 따라야한다고 생각합니다 .

$ pod setup --verbose

• 포드 저장소 마스터 제거
• 포드 설정
• 포드 설치

---

이것은 중단되지 않았거나 다운로드 / 복제 저장소를 수행하지 않습니다 (총 크기는 약 360MB이며 확실하지 않습니다)

1) 활동 모니터 열기

2) 네트워크 탭 선택

3) Google 크롬 -> git-remote-https 확인

---

실제로 코코아 포드가 일을하고 있다는 확신이 필요한 저와 같은 불안정한 사람들을 위해 이것을 시도하십시오. 가장 느린 병목 현상은 cocoapod가 전체 저장소 (~ 300MB)를~/.cocoapods

while true; do
  du -sh ~/.cocoapods/
  sleep 3
done

---

For me in China

I have to use SSH and --depth=1 to boost up!

pod repo remove master
git clone --depth=1 git@github.com:CocoaPods/Specs.git  ~/.cocoapods/repos/master 
pod setup

---

The time required for Pod setup depends on your Internet connection speed. You can check Activity Monitor application regarding this.

It is recommended to use pod setup --verbose command instead of pod setup.

This verbose helps you to see detailed stats while pod is being setup.

---

I had the same problem with pod install and pod update.

The problem is that after executing any of these two commands. A process called git-remote-http in monitor activity shows that something is being downloaded. This has been an existing issue with pods and an issue has opened on github. I've tried a lot of the recommended solutions. I was finally able to install the firebase cocoapod on my project.

Go to

~/.cocoapods/repos

if there is a master file here, you will need to delete it.

You can do something like

sudo rm -R -i yourmasterdirectory 

do pwd ... you should still be in ~/.cocoapods/repos

if the above did not work try

pod repo remove master

Once you have done this run

git clone https://github.com/CocoaPods/Specs.git master

the next thing you need to do is to is run git fetch --depth=2147483647 - this will convert your local repository of Podspecs to be a full clone as noted here:

pod install and pod update should work fast as expected.

---

--VMWare Workstation--virtualizedMac--NetworkSetting--Problem

After like 100 tries I got it to work! I have tried nearly everything described here but nothing solved the problem. It randomly stopped by cloning into master between 0% and 97%. In Activity Monitor I saw the network traffic has stopped.

Finally I have changed the network setting from NAT to BRIDGE. This was the solution!

---

To execute it, you must pay attention in your Internet connection... if it fails for a sec, the command won't continue, but terminal won't tell you what's happening. If the command fails, continue trying... worked for me! I've used that command!

$ git clone https://github.com/CocoaPods/Specs.git ~/.cocoapods/repos/master

---

Just setup the master repo, was excited to see that we have a download progress, see screenshot ;)

CocoaPods 릴리스 1.2.0 (1 월 28 일)은이 릴리스의 모든 기여자와 Danielle Tomlinson 덕분에이 문제를 해결합니다.

---

참고 URL : https://stackoverflow.com/questions/21680573/cocoapods-setup-stuck-on-pod-setup-command-on-terminal